Difference between revisions of "Translations:Servos for flybarless usage/2/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
−
Torque should be at least 2-3 times the heli weight. Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using a special heli servo which are specially made for maximum vibration resistance is a good choice.
+
Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice.

Latest revision as of 13:39, 27 August 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Servos for flybarless usage)
Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice.
TranslationServo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice.

Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Servos_for_flybarless_usage/2/en&oldid=2058"