Help:FAQ Spektrum/de: Difference between revisions

Revision as of 09:08, 4 March 2016 view source Shornstein (talk \| contribs) Bureaucrats, Interface administrators, Suppressors, Administrators, translate-proofr 17,178 edits No edit summary ← Older edit		Revision as of 09:08, 4 March 2016 view source Shornstein (talk \| contribs) Bureaucrats, Interface administrators, Suppressors, Administrators, translate-proofr 17,178 edits No edit summary Newer edit →
Line 57:		Line 57:


	===~~The brand new SPEKTRUM~~ AR7200BX / AR7210BX / AR7300BX ~~only shows a red flashing~~ LED ~~or even nothing. What's wrong?~~===		===Der neue AR7200BX / AR7210BX / AR7300BX zeigt beim Einschalten nur eine blinkende rote Status LED oder er geht überhaupt nicht an===

	Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position. Especially in the vertical direction check that not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Remove all servo connections to make sure that there is no defective servo pulling too much power.<br />		Check very carefully whether all cables are plugged in correctly and all the plugs are connected properly at the correct position. Especially in the vertical direction check that not just 2 pins sit on the header. Also make sure that the polarity is correct on all connections. Remove all servo connections to make sure that there is no defective servo pulling too much power.<br />

Navigation menu