Bureaucrats, Administrators, translate-proofr
15,724
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: + − + + + + +
Marked this version for translation
On a 250 or 450 size heli you should try to get "dark blue" at exactly 6.0° as here servos normaly are not so precise.
On a 250 or 450 size heli you should try to get "dark blue" at exactly 6.0° as here servos normaly are not so precise.
<!--T:42-->
<br />
<br />
==Startup== <!--T:17-->
==Startup== <!--T:17-->
===MICROBEAST does not finish initialization. What can I do?===
===MICROBEAST does not finish initialization. What can I do?=== <!--T:43-->
Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are beeing calibrated, H - N show determining the RC channels and their center positions. Initially the chase is from A - N. If one step is done the indication light for this step will quit running.
Watch the running LED lights during the init phase: If the lights A - G light up the sensor's rest positions are beeing calibrated, H - N show determining the RC channels and their center positions. Initially the chase is from A - N. If one step is done the indication light for this step will quit running.
<!--T:44-->
When LEDs A - G do not quit running
When LEDs A - G do not quit running
* The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench.
* The sensors register movement and calibration of rest position can not be finished. Make sure the unit/the helicopter does not get moved e.g. by wind gusts or people leaning on your work bench.
<!--T:45-->
When LEDs H - N do not quit running
When LEDs H - N do not quit running
* All MICROBEAST/MICROBEAST PLUS: Check whether the receiver sends out control signals and that all cables are properly connected to the MICROBEAST. In particular make sure the plugs are inserted with correct polarity and not offset to the pin connectors of the MICROBEAST.
* All MICROBEAST/MICROBEAST PLUS: Check whether the receiver sends out control signals and that all cables are properly connected to the MICROBEAST. In particular make sure the plugs are inserted with correct polarity and not offset to the pin connectors of the MICROBEAST.
<!--T:46-->
* MICROBEAST/MICROBEAST PLUS Version 2.0.0 and greater: Is the correct type of receiver selected in the receiver setup menu? See [[Setup receiver type - Microbeast, Trajectory]]
* MICROBEAST/MICROBEAST PLUS Version 2.0.0 and greater: Is the correct type of receiver selected in the receiver setup menu? See [[Setup receiver type - Microbeast, Trajectory]]
<!--T:47-->
* AR7200BX: Check binding between transmitter and unit.
* AR7200BX: Check binding between transmitter and unit.