* When using a telemetry receiver and an ESC with telemtry data connector, the ESC is connected to the '''[IO1]''' output. The data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller and setting up telemetry on the next page!) | * When using a telemetry receiver and an ESC with telemtry data connector, the ESC is connected to the '''[IO1]''' output. The data signal of the ESC is connected to '''[IO2]''' input. (You will get further information about connecting the speed controller and setting up telemetry on the next page!) |