Bureaucrats, Administrators, translate-proofr
15,724
edits
Changes
Jump to navigation
Jump to search
Line 9:
Line 9: − Line 55:
Line 54: −
→Setup
To enter one of the menus you have to wait until the unit did perform the self test and did fully initialize: The Status LED must get blue or purple and the cycling LEDs A to G and H to N must have stopped.
To enter one of the menus you have to wait until the unit did perform the self test and did fully initialize: The Status LED must get blue or purple and the cycling LEDs A to G and H to N must have stopped.
Factory reset only can be performed when being within Setup menu. So you have at least to get to Setup menu point A (or later), release the button and then push it and keep it pushed for at least 10 seconds. Note that factory reset will only revert all parameters of parameter menu and setup menu to default. It has no influence on receiver menu parameters. If the unit does not initialize due to wrong receiver setting the factory reset will not help. In such case also have a look here.
Factory reset only can be performed when being within Setup menu. So you have at least to get to Setup menu point A (or later), release the button and then push it and keep it pushed for at least 10 seconds. Note that factory reset will only revert all parameters of parameter menu and setup menu to default. It has no influence on receiver menu parameters. If the unit does not initialize due to wrong receiver setting the factory reset will not help. In such case also have a look here.
===Setup menu points B to D - What are frequency and neutral pulse for a specific servo?===
===Setup menu points B to D - What are frequency and neutral pulse for a specific servo?===
You only have to adjust one direction whether left or right, it doesn't matter. Important is to exactly adjust 6° as this teaches the unit the servo throw. And as said the color is of minor importance but you should try to get to blue as close as possible to achieve best performance.
You only have to adjust one direction whether left or right, it doesn't matter. Important is to exactly adjust 6° as this teaches the unit the servo throw. And as said the color is of minor importance but you should try to get to blue as close as possible to achieve best performance.
==Startup==
==Startup==