Help:FAQ/en: Difference between revisions

Line 148:

===How can I increase rotation rate for aileron, elevator and rudder?===

The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the helicopter ~~as fast as it~~ is ~~determined~~ by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using DualRate in the TX for the specified function) will increase/decrease rotation rate. Note that the rotation rate in first line has nothing to do with your cyclic pitch adjustments at Setup menu points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground! In flight the system will automatically control the pitch as it is necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual and do not rely on what you see when moving the sticks on the ground.

The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the servos until the helicopter reaches the rate that is commanded by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using DualRate in the TX for the specified function) will increase/decrease rotation rate.<br />

The presets at Parameter menu point B are nothing else than different preset DualRate/expo curves inside MICROBEAST. Choose the preset that fits your preferences best and that gives you a good amount of rotation rate. Using the presets (except for the "Transmitter" preset) it is recommended to not change the output signal in the TX significantly as especially when using expo this will bend, compress or stretch the curves, leading to very strange flight behavior. It just is not like adding 5% of expo as the curves between TX and MICROBEAST will multiply and not sum together! Anyhow you may do small adjustments in stick throw, i.e. for slightly increasing the roll rate. This will not significantly deform the MICROBEAST's internal curves.

@@ Line 148: / Line 148: @@
 ===How can I increase rotation rate for aileron, elevator and rudder?===
-The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the helicopter as fast as it is determined by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using DualRate in the TX for the specified function) will increase/decrease rotation rate. Note that the rotation rate in first line has nothing to do with your cyclic pitch adjustments at Setup menu points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground! In flight the system will automatically control the pitch as it is necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual and do not rely on what you see when moving the sticks on the ground.
+The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the servos until the helicopter reaches the rate that is commanded by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using DualRate in the TX for the specified function) will increase/decrease rotation rate.<br />
 The presets at Parameter menu point B are nothing else than different preset DualRate/expo curves inside MICROBEAST. Choose the preset that fits your preferences best and that gives you a good amount of rotation rate. Using the presets (except for the "Transmitter" preset) it is recommended to not change the output signal in the TX significantly as especially when using expo this will bend, compress or stretch the curves, leading to very strange flight behavior. It just is not like adding 5% of expo as the curves between TX and MICROBEAST will multiply and not sum together! Anyhow you may do small adjustments in stick throw, i.e. for slightly increasing the roll rate. This will not significantly deform the MICROBEAST's internal curves.

Help:FAQ/en: Difference between revisions

Navigation menu

Search