Manuals:MBPlusFblV5:Setupmenu intro: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "<translate> {{TOC_MBPlusV5}} {{DISPLAYTITLE:Setup menu|noerror}} __TOC__ <br /> <p> MICROBEAST PLUS offers different type of menu structures for different needs of adjustment..." |
Shornstein (talk | contribs) Marked this version for translation |
||
| Line 1: | Line 1: | ||
<translate> | <translate> | ||
<!--T:1--> | |||
{{TOC_MBPlusV5}} | {{TOC_MBPlusV5}} | ||
{{DISPLAYTITLE:Setup menu|noerror}} | {{DISPLAYTITLE:Setup menu|noerror}} | ||
| Line 5: | Line 6: | ||
<br /> | <br /> | ||
<!--T:2--> | |||
<p> | <p> | ||
MICROBEAST PLUS offers different type of menu structures for different needs of adjustment. Before the first flight MICROBEAST PLUS has to be adjusted to your helicopter mechanics and its components. This basic setup is done in the SETUP MENU.</p> | MICROBEAST PLUS offers different type of menu structures for different needs of adjustment. Before the first flight MICROBEAST PLUS has to be adjusted to your helicopter mechanics and its components. This basic setup is done in the SETUP MENU.</p> | ||
| Line 10: | Line 12: | ||
<br /> | <br /> | ||
=SETUP MENU of the device= | =SETUP MENU of the device= <!--T:3--> | ||
If not already done power up your radio and MICROBEAST PLUS and wait until initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p> | If not already done power up your radio and MICROBEAST PLUS and wait until initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p> | ||
<br /> | <br /> | ||
| Line 23: | Line 25: | ||
<br /> | <br /> | ||
==Button control== | ==Button control== <!--T:4--> | ||
Proceed step by step through the different menu points reaching from A to N and perform the basic adjustment as described in the following. By briefly pushing the button at each step you will save the current setting and proceed to the next step. To leave the SETUP MENU you have to go through all menu points. After pushing the button at the last menu point (depending on installed firmware features and receiver type this either can be [[Manuals:MBPlusFblV5:Setupmenu_M|SETUP MENU point M]] or [[Manuals:MBPlusFblV5:Setupmenu_N|N]] or [[Manuals:MBPlusFblV5:Governormenu_F|GOVERNOR MENU point F]] or [[Manuals:MBPlusFblV5:Governormenu_F|H]]) you will exit the SETUP MENU and the system is ready for operation again.<br /> | Proceed step by step through the different menu points reaching from A to N and perform the basic adjustment as described in the following. By briefly pushing the button at each step you will save the current setting and proceed to the next step. To leave the SETUP MENU you have to go through all menu points. After pushing the button at the last menu point (depending on installed firmware features and receiver type this either can be [[Manuals:MBPlusFblV5:Setupmenu_M|SETUP MENU point M]] or [[Manuals:MBPlusFblV5:Setupmenu_N|N]] or [[Manuals:MBPlusFblV5:Governormenu_F|GOVERNOR MENU point F]] or [[Manuals:MBPlusFblV5:Governormenu_F|H]]) you will exit the SETUP MENU and the system is ready for operation again.<br /> | ||
<br /> | <br /> | ||
| Line 34: | Line 36: | ||
<br /> | <br /> | ||
<!--T:5--> | |||
<p> | <p> | ||
When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 2 exceptions: | When in SETUP MENU you can reset all settings of the device to their factory default value. To do so hold down the button at any menu point of SETUP MENU for at least 10 seconds, then release. After doing so you will not be able to fly anymore! You have to do all the basic heli setup again and also all the other settings from PARAMETER MENU will be reset!! There are 2 exceptions: | ||
| Line 43: | Line 46: | ||
<br /> | <br /> | ||
==Stick control== | ==Stick control== <!--T:6--> | ||
In SETUP MENU we use the sticks of your transmitter to change settings and interact with the menu. Most often the rudder stick is used to change or adjust a value, i. e. choose the mounting direction of the device or trim a servo center position. And on the other hand the rudder stick is used to switch between menu items, i.e. cycle through the servos when doing the trimming. There can be exceptions, so sometimes the sticks simply do what they are supposed to do (i.e. pitch moves the pitch when doing the pitch adjustment), but notice that in general the menu control with rudder plus aileron is always the same. If not it will be mentioned in the instructions.<br /> | In SETUP MENU we use the sticks of your transmitter to change settings and interact with the menu. Most often the rudder stick is used to change or adjust a value, i. e. choose the mounting direction of the device or trim a servo center position. And on the other hand the rudder stick is used to switch between menu items, i.e. cycle through the servos when doing the trimming. There can be exceptions, so sometimes the sticks simply do what they are supposed to do (i.e. pitch moves the pitch when doing the pitch adjustment), but notice that in general the menu control with rudder plus aileron is always the same. If not it will be mentioned in the instructions.<br /> | ||
<br /> | <br /> | ||
=Basic setup with StudioX= | =Basic setup with StudioX= <!--T:7--> | ||
<br /> | <br /> | ||
<br /> | <br /> | ||
=Basic setup with StudioXm= | =Basic setup with StudioXm= <!--T:8--> | ||
<p>If not already done power up your radio and MICROBEAST PLUS and connect the BLE2SYS interface to the [SYS]. Then click "Connect button" on the start screen of StudioXm when the BLE2SYS is found (for further information refer to the [[StudioXm/en|StudioXm instructions]]). Wait until the data is loaded from the device and initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down at the device and you can read "Radio init" in the opening overview size. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down and you can read "Sensor init" in the opening overview size. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode and you can read the gyro gain and mode in the App. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p> | <p>If not already done power up your radio and MICROBEAST PLUS and connect the BLE2SYS interface to the [SYS]. Then click "Connect button" on the start screen of StudioXm when the BLE2SYS is found (for further information refer to the [[StudioXm/en|StudioXm instructions]]). Wait until the data is loaded from the device and initialization sequence is finished. At first the system will calibrate to the radio system, Menu LEDs H to N will cycle up and down at the device and you can read "Radio init" in the opening overview size. '''During this time do not move the sticks on your radio as the system is learning the stick mid positions.''' In the second step MICROBEAST PLUS checks if the sensors are working correctly and learns the sensor rest positions. Here Menu LEDs A to G will cycle up and down and you can read "Sensor init" in the opening overview size. '''During this time do not move the helicopter.''' When initialization is completed the Status LED will change to blue or purple color indicating the current gyro mode and you can read the gyro gain and mode in the App. If you can't get through the initialization sequence either because LEDs A-G or LEDs H-N don't stop cycling please read [[Help:FAQ:Powerup/en|the FAQ]]. Note that during initialization pressing the button has no significant effect and you will not be able to enter any menu.</p> | ||
<br /> | <br /> | ||