Changes

=Setup with StudioXm= <!--T:10-->

=Setup with StudioXm= <!--T:10-->

Choose the swashplate mixing/swash type of your helicopter by clicking the corresponding button in the app. With the buttons '''+''' and '''-''' you can adjust the Virtual swash rotation/swashplate phasing if necessary (i.e. when using a scale helicopter with multiblade rotorhead).To set a different type of swash mixing click '''Advanced view'''. Then a screen with advanced setup options will open.<br />

Choose the swashplate mixing/swash type of your helicopter by clicking the corresponding button in the app. With the buttons '''+''' and '''-''' you can adjust the Virtual swash rotation/swashplate phasing if necessary (i.e. when using a scale helicopter with multiblade rotorhead). To set a different type of swash mixing click '''Advanced view'''. Then a screen with advanced setup options will open.<br />

[[File:SetupGm.png|x250px]]<br />

<br />

<br />

==Custom swash mixing== <!--T:9-->

==Custom swash mixing== <!--T:9-->

You can change the Swash geometry just as you like. You will see that the values you see here are preset by the type you've chosen in the SETUP MENU overview. In example what you may do here is, when having a mechanical mixed helicopter, you can change the servo throw ratio of the aileron and elevator servo (outputs CH1 and CH2) in case these are not making similar cyclic pitch deflection (Note: You can not change the servo throw in the transmitter as with the transmitter you do not directly control the servos with the radio!).<br />

To create an individual swash geometry in case the given presets do not fit to your helicopter's swash type choose Customize. In example what you may do here is, when having a mechanical mixed helicopter, you can change the servo throw ratio of the aileron and elevator servo (outputs CH1 and CH2) in case these are not making similar cyclic pitch deflection (Note: You mustn't change the servo throw in the transmitter as with the transmitter you do not directly control the servos!)<br />

By default the values you see here are preset by the type you've chosen in the overview before. Change them as necessary.<br />

<br />

<br />

<br />

<br />