Manuals:MBPlusFblV5:Parametermenu: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
Marked this version for translation
No edit summary
Line 17: Line 17:
<br />
<br />
When using the bank switching feature (only with PROEDITION firmware) you can only change the settings for bank 1 using the LED menu of MICROBEAST PLUS. The parameters for banks 2 and 3 must be set in the StudioX software/StudioXm app. When disabling bank switching the settings will not change as bank 1 is used by default!<br />
When using the bank switching feature (only with PROEDITION firmware) you can only change the settings for bank 1 using the LED menu of MICROBEAST PLUS. The parameters for banks 2 and 3 must be set in the StudioX software/StudioXm app. When disabling bank switching the settings will not change as bank 1 is used by default!<br />
<br />
<br />
=Setup with StudioX= <!--T:3-->
Please note that editing parameters is only possible when the device has initialized completely. If it does not pass initialization sequence check the device status from the status bar on the bottom. If the system does not finish "Receiver init" check the receiver settings and radio setup. If the system does not finish "Sensor init" make sure that it is perfectly standing still and that power supply is stable.<br />
<br />
Edit parameters in the software as necessary by either choosing the preset buttons or by clicking the "Customize" link. When using the bank switching feature (only with PROEDITION firmware) you can set parameters differently for the three flight modes/banks and switch between those different settings in flight. When bank switching is deactivated you can only set parameters for bank 1 as this is the default bank.<br />
<br />
<br />
<br />
<br />
Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:MBPlusFblV5:Parametermenu"