Changes

The following receiver systems are compatible with SRXL as they directly implemented the SRXL protocol as specified for MULTIPLEX. MICROBEAST and MICROBEAST plus will work without issues with these receivers, but be aware that due to the same manufacturer ID they will be identified as MULTIPLEX receivers and therefore the preset channel assignment of MICROBEAST/MICROBEAST plus may not fit to your radio system, so a manual channel assignment is mandatory (see pages 28 MICROBEAST manual Version 3.0.3):

The following receiver systems are compatible with SRXL as they directly implemented the SRXL protocol as specified for MULTIPLEX. MICROBEAST and MICROBEAST plus will work without issues with these receivers, but be aware that due to the same manufacturer ID they will be identified as MULTIPLEX receivers and therefore the preset channel assignment of MICROBEAST/MICROBEAST plus may not fit to your radio system, so a manual channel assignment is mandatory (see pages 28ff in MICROBEAST manual):

{| class="wikitable"

{| class="wikitable"

! Manufacturer                                  !! Receivers

! Manufacturer                                  !! Receivers

|-

|-

| JR propo                                      || JR X-Bus (select X-Bus2 output in the radio)

| JR propo                                      || JR X-Bus (select X-Bus Mode_B output in the radio)

|-

|-

| Jeti                                          || Receivers with Jeti UDI output (firmware update may be necessary)

| Jeti                                          || Receivers with Jeti UDI output (firmware update may be necessary)

|}

|}