Translations:Manuals:MBUltraFblV5:AttitudeControl/21/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
Importing a new version from external source
 
FuzzyBot (talk | contribs)
Importing a new version from external source
 
Line 8: Line 8:
}}<br />
}}<br />
<br />
<br />
{{WARNING_QUOTE|Firstly enable AttitudeControl when all initial settings in SETUP MENU and RECEIVER MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.}}
Briefly press the button store the setting. In case you've chosen a mode with collective pitch control, pressing the button at point '''L''' will lead to menu point '''M'''. Otherwise menu point '''M''' will be skipped und the system will exit PARAMETER MENU.<br />
<br />
<br />

Latest revision as of 14:22, 14 March 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBUltraFblV5:AttitudeControl)
{{TABLEV5|AttitudeControl operation mode
|AttitudeControl disabled
|Angular Mode
|Bail out rescue mode
|Bail out rescue mode with pitch
|3D - Mode
|3D - Mode with pitch
}}<br />
<br />
Briefly press the button store the setting. In case you've chosen a mode with collective pitch control, pressing the button at point '''L''' will lead to menu point '''M'''. Otherwise menu point '''M''' will be skipped und the system will exit PARAMETER MENU.<br />
<br />
Status-LED AttitudeControl operation mode
off AttitudeControl disabled
purple Angular Mode
red flashing Bail out rescue mode
red Bail out rescue mode with pitch
blue flashing 3D - Mode
blue 3D - Mode with pitch



Briefly press the button store the setting. In case you've chosen a mode with collective pitch control, pressing the button at point L will lead to menu point M. Otherwise menu point M will be skipped und the system will exit PARAMETER MENU.