Translations:Manuals:BXFbl:Radio Setup:ELRS/7/en: Difference between revisions
Jump to navigation
Jump to search
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
=Radio setup= | =Radio setup= | ||
When using a ELRS receiver make sure to enable the CRSF using the web interface of your receiver. Using the RADIOMASTER ER-series receiver you can change the output signals of the receivers as needed. To access the web interface, power up the receiver, wait for one minute until the receiver flashes quickly, then connect your computer or smartphone to the new wifi network 10.0.0.1 (Password: expresslrs).<br /> | When using a ELRS receiver make sure to enable the CRSF output using the web interface of your receiver. Using the RADIOMASTER ER-series receiver you can change the output signals of the receivers as needed. Here usually we set the CH2 and CH3 outputs of the receiver to RX and TX for the CRFS input and output. The smaller RADIOMASTER receivers only come with RX and TX outputs, so there is nothing special to do here. To access the web interface, power up the receiver, wait for one minute until the receiver flashes quickly, then connect your computer or smartphone to the new wifi network 10.0.0.1 (Password: expresslrs).<br /> | ||
<br /> | <br /> | ||
Latest revision as of 14:26, 2 July 2024
Radio setup
When using a ELRS receiver make sure to enable the CRSF output using the web interface of your receiver. Using the RADIOMASTER ER-series receiver you can change the output signals of the receivers as needed. Here usually we set the CH2 and CH3 outputs of the receiver to RX and TX for the CRFS input and output. The smaller RADIOMASTER receivers only come with RX and TX outputs, so there is nothing special to do here. To access the web interface, power up the receiver, wait for one minute until the receiver flashes quickly, then connect your computer or smartphone to the new wifi network 10.0.0.1 (Password: expresslrs).