Translations:Manuals:BXFbl:Receiver M/24/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
7,903 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
7,903 edits
Importing a new version from external source
 
Line 1: Line 1:
When using a HOTT or S.Port receiver with separate telemetry wire connected at [SYS], the control wire of your Hobbywing® ESC is connected to port [IO2]. The programming port of your Hobbywing® ESC must be connected to the [SAT] port at the side of your MICROBEAST PLUS/ULTRA (3rd pin from the front!).<br />
When using a HOTT or S.Port receiver with separate telemetry wire connected at [SYS], the control wire of your Hobbywing® ESC is connected to port [IO2] / [CH5]. The programming port of your Hobbywing® ESC must be connected to the [SAT] port at the side of your MICROBEAST PLUS / ULTRA (3rd pin from the front!).<br />
<br />
<br />

Latest revision as of 11:58, 5 July 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Receiver M)
When using a HOTT or S.Port receiver with separate telemetry wire connected at [SYS], the control wire of your Hobbywing® ESC is connected to port [IO2] / [CH5]. The programming port of your Hobbywing® ESC must be connected to the [SAT] port at the side of your MICROBEAST PLUS / ULTRA (3rd pin from the front!).<br />
<br />

When using a HOTT or S.Port receiver with separate telemetry wire connected at [SYS], the control wire of your Hobbywing® ESC is connected to port [IO2] / [CH5]. The programming port of your Hobbywing® ESC must be connected to the [SAT] port at the side of your MICROBEAST PLUS / ULTRA (3rd pin from the front!).

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Receiver_M/24/en&oldid=24988"