Help:StudioX:HMSoft: Difference between revisions

Jump to navigation Jump to search
← Older edit
No edit summary
No edit summary
 
Line 41: Line 41:


<!--T:9-->
<!--T:9-->
At first enter: AT+BAUD?<br />
At first enter: AT+MODE2<br />
The interface should reply: OK+Set:2<br />
<br />
<br />
Then enter: AT+BAUD?<br />
The interface should reply: OK+Get:7<br />
The interface should reply: OK+Get:7<br />
In case it show a different number, the baud rate is not set correctly.<br />
<br />
<br />
In case it shows a different number, the baud rate is not set correctly.<br />
You can change the setting by entering the command: AT+BAUD7<br />
You can change the setting by entering the command: AT+BAUD7<br />
<br />
The interface will reply: OK+Set:7<br />
The interface will reply: OK+Set:7<br />
<br />
<br />
<!--T:10-->
Next please enter: AT+MODE?<br />
<br />
The interface should reply: OK+Get:1<br />
In case it show a different number, the communication mode is not set correctly.<br />
<br />
You can change the setting by entering the command: AT+MODE1<br />
<br />
The interface will reply: OK+Set:1<br />
<br />
<br />
<br />


<!--T:11-->
<!--T:11-->
Finally you can change the name of the device: AT+NAMEUSB2SYS<br />
If you like you can change the name of the device: AT+NAMEUSB2SYS<br />
<br />
The interface should reply: OK+Set:USB2SYS<br />
The interface should reply: OK+Set:USB2SYS<br />
<br />
<br />
<!--T:10-->
Finally enter: AT+MODE1<br />
The interface should reply: OK+Set:1<br />
<br />
<br />


<!--T:12-->
<!--T:12-->
===Connection to StudioX app===
===Connection to StudioX app===
Now setup should be finished. Disconnect the device from the app and close the app completely. Power cycle you BLE2SYS and reconnect to the BEASTX systems's SYS-port. The blue LED on BLE2SYS should be flashing steadily.<br />
Now setup should be finished. Disconnect the device from the app and close the app completely. Power cycle you BLE2SYS and reconnect to the BEASTX system's SYS-port. The blue LED on BLE2SYS should be flashing steadily.<br />
<br />
<br />
Start StudioX and search for the device ''BLE2SYS'', if needed (click '''Refresh'''). Then click the '''Connect''' button. The blue LED should light up steadily and you BEASTX system should connect now.<br />
Start StudioX and search for the device ''BLE2SYS'', if needed (click '''Refresh'''). Then click the '''Connect''' button. The blue LED should light up steadily and you BEASTX system should connect now.<br />
Retrieved from "https://wiki.beastx.com/index.php?title=Help:StudioX:HMSoft"