Translations:Manuals:BXFbl:Receiver M/17/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older edit
FuzzyBot (talk | contribs)
8,369 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
8,369 edits
Importing a new version from external source
 
Line 1: Line 1:
'''Telemetry input'''<br />
==Telemetry input==
At Menu Point '''M''' you can choose the type of ESC/signal source as telemetry data input. Usually the ESC data line that is connected at [CH5] / [IO2] port at MICROBEAST PLUS / ULTRA.<br />
At Menu Point '''M''' you can choose the type of ESC/signal source as telemetry data input. Usually the ESC data line that is connected at [CH5] / [IO2] port at MICROBEAST PLUS / ULTRA.<br />
<br />
<br />

Latest revision as of 12:51, 8 September 2026

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Receiver M)
==Telemetry input==
At Menu Point '''M''' you can choose the type of ESC/signal source as telemetry data input. Usually the ESC data line that is connected at [CH5] / [IO2] port at MICROBEAST PLUS / ULTRA.<br />
<br />
When using a CRFS or SBUS receiver the data line must be connected at the [SAT] port at the side of MICROBEAST PLUS / ULTRA as the receiver is connected to [CH5] / [IO2]. The telemetry output line going back to the receiver can either be CRSF or FRSky S.Port connected at [SYS].<br />
<br />
Using NANOBEAST the ESC telemetery is always connected to [SAT] port.
<br />
To select the ESC/telemetry data source at Menu Point M, move the rudder stick repeatedly in one direction until the Status LED lights in the correct color:<br />
<br />

Telemetry input

At Menu Point M you can choose the type of ESC/signal source as telemetry data input. Usually the ESC data line that is connected at [CH5] / [IO2] port at MICROBEAST PLUS / ULTRA.

When using a CRFS or SBUS receiver the data line must be connected at the [SAT] port at the side of MICROBEAST PLUS / ULTRA as the receiver is connected to [CH5] / [IO2]. The telemetry output line going back to the receiver can either be CRSF or FRSky S.Port connected at [SYS].

Using NANOBEAST the ESC telemetery is always connected to [SAT] port.
To select the ESC/telemetry data source at Menu Point M, move the rudder stick repeatedly in one direction until the Status LED lights in the correct color:

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Receiver_M/17/en&oldid=26892"