Changes

 

==Swashplate gyro setup==

==Swashplate gyro setup==

4. Finally, the tail-stopping behaviour is adjusted using dial 3. To do this, perform fast piros while hovering and then stop the piro abruptly. The tail should stop cleanly without turning further and without swinging back. If the tail continues to turn after the stop or feels "soft" when stopping, increase the gain on dial 3. If the tail swings back when stopping, decrease the gain using dial 3. When tuned properly, the tail should not make much noise when stopping. If you can hear the tail when stopping, you're probably past the optimum setting.

4. Finally, the tail-stopping behaviour is adjusted using dial 3. To do this, perform fast piros while hovering and then stop the piro abruptly. The tail should stop cleanly without turning further and without swinging back. If the tail continues to turn after the stop or feels "soft" when stopping, increase the gain on dial 3. If the tail swings back when stopping, decrease the gain using dial 3. When tuned properly, the tail should not make much noise when stopping. If you can hear the tail when stopping, you're probably past the optimum setting.