Help:FAQ/de: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
Created page with "==Empfänger Einstellmenü=="
Created page with "===Spektrum AR9020 mit SRXL/XPlus Signalausgabe=== ''Ich verwende ein Microbeast Plus mit Firmware 3.2.0 (oder höher) und möchte den SRXL/XPlus Ausgang des AR9020 Empfänger..."
Line 4: Line 4:
==Empfänger Einstellmenü==
==Empfänger Einstellmenü==


===Spektrum AR9020 SRXL/XPlus signal output===
===Spektrum AR9020 mit SRXL/XPlus Signalausgabe===
''I'm using firmware 3.2.0 (or greater) which is stated to support Spektrum SRXL/XPLus serial wire signal but MICROBEAST PLUS does not recognize my AR9020 receiver at receiver menu point B (Status LED stays red).''
''Ich verwende ein Microbeast Plus mit Firmware 3.2.0 (oder höher) und möchte den SRXL/XPlus Ausgang des AR9020 Empfängers nutzen. Obwohl im Empfänger Einstellmenu der Empfängertyp bei Einstellpunkt A auf "SRXL" gestellt wurde, werden keine Empfängersignale erkannt. Die Status LED bei Einstellpunkt B bleibt rot.''


Unfortunately the communication protocol of the AR9020 receiver is not fully compatible to the SRXL specification. We can provide a MICROBEAST PLUS firmware with modified Spektrum SRXL protocol so that the AR9020 receiver's SRXL output can be used anyway. You can request the firmware at our [mailto:service@beastx.com service center]. When using this firmware it is not possible to use receivers from Multiplex-RC with SRXL V2 signal output, neither is it possible to use Spektrum receivers that are compliant with SRXL standards. Otherwise this modified firmware does not differ from the default firmware.<br />
Unfortunately the communication protocol of the AR9020 receiver is not fully compatible to the SRXL specification. We can provide a MICROBEAST PLUS firmware with modified Spektrum SRXL protocol so that the AR9020 receiver's SRXL output can be used anyway. You can request the firmware at our [mailto:service@beastx.com service center]. When using this firmware it is not possible to use receivers from Multiplex-RC with SRXL V2 signal output, neither is it possible to use Spektrum receivers that are compliant with SRXL standards. Otherwise this modified firmware does not differ from the default firmware.<br />
Retrieved from "https://wiki.beastx.com/index.php?title=Help:FAQ/de"