Help:FAQ/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) No edit summary |
||
Line 99: | Line 99: | ||
The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the helicopter as fast as it is determined by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using Dualrate in the TX for the specified function) will increase/decrease rotaion rate. Note that the rotation rate in first line has nothing to do with your cyclic pitch adjustments at Setup menu points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground! In flight the system will automaticaly control the pitch as it is necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual and do not rely on what you see when moving the sticks on the ground. | The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the helicopter as fast as it is determined by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using Dualrate in the TX for the specified function) will increase/decrease rotaion rate. Note that the rotation rate in first line has nothing to do with your cyclic pitch adjustments at Setup menu points J or L and also has nothing to do with the cyclic pitch when steering cyclic on the ground! In flight the system will automaticaly control the pitch as it is necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual and do not rely on what you see when moving the sticks on the ground. | ||
Die einzelnen Phasen bei Parametermenü Punkt B sind eine Mischung aus Expo und einer bestimmten Drehrate. Da die eingestellten Werte nicht zahlengenau auf die unterschiedlichen Sendertypen passen empfehlen wir, falls eine eigene Einstellung per Fernsteuerung bevorzugt wird, Parameterpunkt B auf "blau" zu stellen, im Sender mit ca. 20 - 30% Expo zu beginnen (mit negativem Vorzeichen bei Futaba) und den Servoweg auf ca. 70-80% zu reduzieren und sich dann allmählich an das gewünschte Steuerverhalten heranzutasten. | |||
'''Hinweis zu MICROBEAST/AR7200BX/AR7300BX:''' | '''Hinweis zu MICROBEAST/AR7200BX/AR7300BX:''' |