Help:Governor: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) No edit summary |
||
| Line 22: | Line 22: | ||
Only increase the throttle response stepwise and make sure the throttle will not start to oscillate. | Only increase the throttle response stepwise and make sure the throttle will not start to oscillate. | ||
Note that with nitro helicopters high throttle response can cause the motor to quit when the throttle | Note that with nitro helicopters high throttle response can cause the motor to quit when the throttle | ||
is opened too fast. With electric helicopters changing | is opened too fast. With electric helicopters changing the throttle very fast can cause the speed | ||
controller to overheat and especially hard changes from unloaded to loaded conditions can cause incorrect | controller to overheat and especially hard changes from unloaded to loaded conditions can cause incorrect | ||
commutations of the ESC (depending on the type of motor) which can damage the ESC if this does not have | commutations of the ESC (depending on the type of motor) which can damage the ESC if this does not have | ||
appropriate protection mechanisms. | appropriate protection mechanisms. Although MICROBEAST PLUS provides such mechanisms for safety reason | ||
we highly recommend to check with the manufacturer of the speed controller if it can be used in combination | |||
with your motor and the Microbeast PLUS RPM Governor function. | |||
</translate> | </translate> | ||