Manuals:MB Plus:Receiver Installation/de: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 4: Line 4:
<br />
<br />


===Standard receivers===
===Standardempfänger===
A standard receiver is a receiver that is connected to MICROBEAST PLUS by using the single servo outputs of the receiver and connect them to the five control channels of MICROBEAST PLUS. The channel which determines the controlled function simply is selected by inserting each plug to the correct output at the receiver.<br />
Standard Empfänger ist jeder Empfänger mit herkömmlichen (Servo-)Anschlüssen. An diese werden 5 einzelne Steuerleitungen angesteckt und mit MICROBEAST PLUS verbunden. Über jede dieser Leitungen wird jeweils eine Steuerfunktion vom Fernsteuersender an das MICROBEAST PLUS übertragen. Die Zuordnung der Steuerfunktionen am MICROBEAST PLUS ergibt sich aus der Reihenfolge, in der die Stecker am Empfänger angesteckt werden.
<br />
<gallery widths=300px>
Image:Standard_RX.png
Image:Spektrum_RX.png
Image:Futaba_RX.png
</gallery>
The designation Spektrum®/Futaba® is only exemplary. You can use any radio system with at least 6 output channels to connect to MICROBEAST PLUS. For finding out how to connect the wires to MICROBEAST PLUS have a look at your radio's servo monitor and refer to the radio's instruction manual.<br />
<br />
{{QUOTE|[[Image:Warning.png|18px|sub]] Ensure a tight fit of the connectors. The pin board of MICROBEAST PLUS is designed so that the plugs firmly clamp each other when they are fully inserted. Anyhow, especially when using a single-line receiver, it is possible that connectors are plugged in with no adjacent neighbors. Such plugs should additionally be secured against loosening.}}<br />
<br />


===Single-Line receivers===
===Single-Line receivers===
Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:MB_Plus:Receiver_Installation/de"