Manuals:MB Plus:Setupmenu A/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
Importing a new version from external source
 
FuzzyBot (talk | contribs)
Importing a new version from external source
Line 28: Line 28:


</gallery>
</gallery>
You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.<br />
<br />
<br />
You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.<br />
<br />
----
When finished briefly push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_B|Setup menu point '''B''']].
When finished briefly push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_B|Setup menu point '''B''']].
----
<br />
<br />

Revision as of 14:47, 28 May 2015

The MICROBEAST PLUS unit can be mounted in nearly all possible orientations. The only restriction is that the plug connectors have to point in or against flying direction and the egdes of the unit must be parallel to the rotation axis.

At Setup menu point A choose the orientation that the unit is actually mounted on your heli. There are 8 possible orientations. The color of the Status-LED displays the currently selected orientation:

Status-LED Mounting orientation
off flat, sticker on top side, socket points in flight direction
purple flashing vertical, button is on the top, socket points in flight direction
purple flat inverted, sticker on bottom side, socket points in flight direction
red flashing vertical inverted, button is on the bottom, socket points in flight direction
red flat, sticker on top side, socket points to the tail boom
blue flashing vertical, button is on the top, socket points to the tail boom
blue flat inverted, sticker on bottom side, socket points to the tail boom
red/blue vertical inverted, button is on the bottom, socket points to the tail boom


You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.



When finished briefly push the button to save the configuration and to proceed to Setup menu point B.