Help:FAQ/de: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 71: Line 71:
* Die Stromversorgung ist nicht stabil, z.B. weil die sie unterdimensioniert ist oder weil ein Servo defekt ist.
* Die Stromversorgung ist nicht stabil, z.B. weil die sie unterdimensioniert ist oder weil ein Servo defekt ist.


When LEDs H - N do not quit running
Die Sequenz '''H''' - '''N''' wird nicht beendet
* Check whether the receiver sends out control signals and that all cables are properly connected to the MICROBEAST/MICROBEAST PLUS. In particular make sure the plugs are inserted with correct polarity and not offset to the pin connectors of the MICROBEAST.
* MICROBEAST/MICROBEAST PLUS (alle Versionen): Prüfen Sie sämtliche Verbindungen zwischen MICROBEAST und Empfänger und stellen Sie sicher, dass der Empfänger die Steuersignale vom Sender weitergibt (richtig gebunden, richtiger Ausgabemodus, ...). Achten Sie auf korrekte Polarität der Stecker und darauf, dass die Stecker in richtiger Höhe auf die Pinleiste am Gerät aufgesteckt sind.


* Is the correct type of receiver selected in the [[Manuals:MB_Plus:Receiver_setup_intro|receiver setup menu]]? Particularly when using a Spektrum® radio system note that receivers like Spektrum® AR6100, 7000, 9000 etc. are "Standard" receivers! The selection of "Spektrum®" in the receiver setup menu only applies for direct connection of one single Spektrum satellite with the optional available adapter. In general when using a serial-wire receiver check if the Status-LED lights up in "blue" color at [[Manuals:MB_Plus:Receiver_setup_menu_B|Receiver setup menu point '''B''']] indicating there is a valid signal coming from the receiver.  
* Is the correct type of receiver selected in the [[Manuals:MB_Plus:Receiver_setup_intro|receiver setup menu]]? Particularly when using a Spektrum® radio system note that receivers like Spektrum® AR6100, 7000, 9000 etc. are "Standard" receivers! The selection of "Spektrum®" in the receiver setup menu only applies for direct connection of one single Spektrum satellite with the optional available adapter. In general when using a serial-wire receiver check if the Status-LED lights up in "blue" color at [[Manuals:MB_Plus:Receiver_setup_menu_B|Receiver setup menu point '''B''']] indicating there is a valid signal coming from the receiver.  
Retrieved from "https://wiki.beastx.com/index.php?title=Help:FAQ/de"