Line 6:
Line 6:
<br />
<br />
{{TABLE|Spool up rate
{{TABLE|Spool up rate
− |50 rpm/s
+ |50 rps
− |100 rpm/s
+ |100 rps
− |200 rpm/s
+ |200 rps
− |300 rpm/s
+ |300 rps
− |400 rpm/s
+ |400 rps
}}<br />
}}<br />
The option “user defined” allows you to choose your own setting that can be edited by using the [[StudioX_overview|StudioX software bundle]] and the separately available USB2SYS interface.<br />
The option “user defined” allows you to choose your own setting that can be edited by using the [[StudioX_overview|StudioX software bundle]] and the separately available USB2SYS interface.<br />
Latest revision as of 12:49, 30 September 2015
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MB Plus:Parametermenu J )
{{TOC_MBPlus}} {{DISPLAYTITLE:Parameter menu point J|noerror}} When activating the RPM Governor this will not apply full throttle immediately but will increase the rotor head speed slowly until the desired preset head speed is reached. At menu point '''J''' you can determine how quickly this soft start occurs when the RPM Governor is activated initially. The speed is given in number of revolutions by how much the rotor speed is increased per second. The higher the speed the faster your preset head speed will be reached. Please note that the given rates only are indicative. Depending on the response of the speed controller and the inertia of the rotor system it can actually take longer or shorter until the desired speed is reached.<br /> <br /> The choice is made by moving the rudder stick into one direction until the Status-LED lights in the desired color.<br /> <br /> {{TABLE|Spool up rate |50 rps |100 rps |200 rps |300 rps |400 rps }}<br /> The option “user defined” allows you to choose your own setting that can be edited by using the [[StudioX_overview|StudioX software bundle]] and the separately available USB2SYS interface.<br /> <br /> <br /> ---- Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Parametermenu_K|Parameter menu point '''K''']]. ----
{{TOC_MBPlus}}
{{DISPLAYTITLE:Parameter menu point J|noerror}}
When activating the RPM Governor this will not apply full throttle immediately but will increase the rotor head speed slowly until the desired preset head speed is reached. At menu point '''J''' you can determine how quickly this soft start occurs when the RPM Governor is activated initially. The speed is given in number of revolutions by how much the rotor speed is increased per second. The higher the speed the faster your preset head speed will be reached. Please note that the given rates only are indicative. Depending on the response of the speed controller and the inertia of the rotor system it can actually take longer or shorter until the desired speed is reached.<br />
<br />
The choice is made by moving the rudder stick into one direction until the Status-LED lights in the desired color.<br />
<br />
{{TABLE|Spool up rate
|50 rps
|100 rps
|200 rps
|300 rps
|400 rps
}}<br />
The option “user defined” allows you to choose your own setting that can be edited by using the [[StudioX_overview|StudioX software bundle]] and the separately available USB2SYS interface.<br />
<br />
<br />
----
Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Parametermenu_K|Parameter menu point '''K''']].
----
Translation {{TOC_MBPlus}} {{DISPLAYTITLE:Parameter menu point J|noerror}} When activating the RPM Governor this will not apply full throttle immediately but will increase the rotor head speed slowly until the desired preset head speed is reached. At menu point '''J''' you can determine how quickly this soft start occurs when the RPM Governor is activated initially. The speed is given in number of revolutions by how much the rotor speed is increased per second. The higher the speed the faster your preset head speed will be reached. Please note that the given rates only are indicative. Depending on the response of the speed controller and the inertia of the rotor system it can actually take longer or shorter until the desired speed is reached.<br /> <br /> The choice is made by moving the rudder stick into one direction until the Status-LED lights in the desired color.<br /> <br /> {{TABLE|Spool up rate |50 rps |100 rps |200 rps |300 rps |400 rps }}<br /> The option “user defined” allows you to choose your own setting that can be edited by using the [[StudioX_overview|StudioX software bundle]] and the separately available USB2SYS interface.<br /> <br /> <br /> ---- Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Parametermenu_K|Parameter menu point '''K''']]. ----
When activating the RPM Governor this will not apply full throttle immediately but will increase the rotor head speed slowly until the desired preset head speed is reached. At menu point J you can determine how quickly this soft start occurs when the RPM Governor is activated initially. The speed is given in number of revolutions by how much the rotor speed is increased per second. The higher the speed the faster your preset head speed will be reached. Please note that the given rates only are indicative. Depending on the response of the speed controller and the inertia of the rotor system it can actually take longer or shorter until the desired speed is reached.
The choice is made by moving the rudder stick into one direction until the Status-LED lights in the desired color.
Status-LED
Spool up rate
purple
50 rps
red flashing
100 rps
red
200 rps
blue flashing
300 rps
blue
400 rps
off
user defined
The option “user defined” allows you to choose your own setting that can be edited by using the StudioX software bundle and the separately available USB2SYS interface.
Push the button to save the configuration and to proceed to Parameter menu point K .