Box content and accessories

From BEASTX Wiki
Revision as of 12:16, 1 December 2017 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search

This is what you get when buying the MICROBEAST PLUS



  • the MICROBEAST PLUS flybarless unit
  • printed Quickstart manual, Quick reference card and BEASTX sticker set
  • all the wires to connect your receiver to the system
  • 3M gyro pads
  • plastic tool for adjusting the gain dials


Please note: MICROBEAST PLUS is usually sold with BASIC firmware. If you like, you can upgrade to PROEDITION firmware later using the StudioX PC software or StudioXm app. Ask your dealer if you need the PROEDITION firmware upgrade installed already.


This is what you get when buying the MICROBEAST PLUS HD




  • the MICROBEAST PLUS HD flybarless unit
  • printed Quickstart manual, Quick reference card and BEASTX sticker set
  • all the wires to connect your receiver to the system
  • 3M gyro pads
  • plastic tool for adjusting the gain dials
  • high power connector and on/off switch



Please note: MICROBEAST PLUS HD is usually sold with BASIC firmware. If you like, you can upgrade to PROEDITION firmware later using the StudioX PC software or StudioXm app. Ask your dealer if you need the PROEDITION firmware upgrade installed already.