Translations:Manuals:MBPlusFblV52:Radio System/9/en

Single wire without telemetry

• The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS
• The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos.
• You can connect a power supply (second BEC wire, battery) to the [SYS] port and/or to the receiver (in case this has additional servo or battery ports). All servo ports will form a parallel power circuit (except the port [RUD|PIT|AUX]; please do not connect anything here!).
  

Single-line receiver with additional servo output channels