MICROBEAST ULTRA V5 1. Introduction 2. Box content and accessories 3. Hardware installation 4. Radio system 5. Receiver Menu 6. Basic setup Device orientation Swashplate servos Rudder pulse width Rudder frequency Rudder control Swash mixing Servo trim Servo directions Cyclic throw Collective pitch Servo limit Cyclic directions 7. Headspeed Governor Activating the governor Sensor test mode Throttle low position Throttle high position Transmitter setup Signal divider Main gear ratio 8. Additional settings Trimming Control style Special parameters Gains 9. AttitudeControl (Self leveling) 10. Bank Switching 11. Factory reset 12. Version information 13. Firmware update
MICROBEAST ULTRA V5