Translations:Manuals:BXFbl:FactoryReset/4/en

Factory reset with StudioX Flow

The factory reset is located on the second page of the Backup/Restore section. Swipe to the left on the Backup/Restore page or choose Factory reset from the menu.

1. Click Reset device and confirm the safety question with Yes.
2. A countdown of 5 seconds starts. Click Abort if you want to cancel the reset.
3. When the countdown has finished, all settings are reset to factory defaults and the message FACTORY RESET – Your system has been reset. Do not fly! appears.
4. Click OK. StudioX Flow reconnects to the device and returns to the main menu.
   

Now you must perform the complete basic setup again before you can fly the helicopter. Tip: create a backup before performing the factory reset. This way you can restore individual settings later.

File:StudioXFlow reset page.png

File:StudioXFlow reset countdown.png

Please note: The factory reset does not change your receiver settings (receiver type, function assignment, failsafe settings). These can be changed in the RC System section of StudioX Flow.