Aktuelle Firmware Versionen

Firmware Updates für MICROBEAST/Trajectory/AR7200BX werden bei Anforderung exklusiv für Ihr Gerät erstellt und an die angegebene EMail Adresse verschickt! Um ein Update anfordern zu können ist es notwendig, dass Sie die Seriennummer des Geräts bereithalten. Falls Sie diese Nummer nicht zur Hand haben, lesen Sie bitte diese Hinweise. Alternativ können Sie Firmware Updates für diese Geräte auch direkt über die StudioX Software herunterladen (StudioX 2.0 erforderlich! Nähere Infos erhalten Sie hier)

Updates für MICROBEAST PLUS können nur direkt über die StudioX 2.0 Software heruntergeladen werden.

Updating MICROBEAST PLUS can be directly done from within StudioX 2.0 only.

MICROBEAST PLUS

Current firmware versions available:

4.0.0
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are
offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl.
As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the
additional features there is no functional difference to firmware version 3.2.0. Of course also in future you will get
product updates for free and for all versions. So if you don't need the additional features there is no must to buy them.

 * RPM Governor can be used for electric and nitro/gas helicopters. It has built in soft start and autorotation bail
   out function. The control it quite similar to electric speed controllers with governor function, so you simply set your
   throttle curves as switches for "motor off", "headspeed 1", "headspeed 2", "autorotation bailout". Optional the nitro
   governor can be also used in classic style with a separate switch for govenor/rpm control.

 * AttitudeControl overs different modes of self leveling. These are Bailout rescue mode, 3D-Mode and Flighttrainer
   mode with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to
   level position if you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust
   stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight
   regardless of how the pilot moves the stick. 

3.2.0
 * supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
 * added rudder servo sub trim feature
 * changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
 * safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go
   through the complete menu otherwise nothing will change

3.1.3
  * Bugfix: receiver channel initialisation could cause unit to start without stick control

MICROBEAST

Updates für MICROBEAST können hier angefordert werden oder über StudioX 2.0 heruntergeladen werden (siehe hier).

Current firmware version available:

3.0.12
  * Supports Graupner HOTT SUMD serial line signal
  * Improved receiver channel initialization
  * Improved tailgyro algorithm for normal (rate) mode

Trajectory

Request Updates Files for the Trajectory here or download them directly with StudioX 2.0 (see here)

Current firmware version available:

3.0.12 (similar to MICROBEAST)

AR7200BX

Request Updates Files for the AR7200BX here or download them directly with StudioX 2.0 (see here)

Current firmware versions available:

4.0.14
  * RPM Governor feature for nitro and gas engines
3.1.0 (similar to MICROBEAST firmware 3.0.12)