BEASTX Devices
Microbeast PLUS and Microbeast PLUS HD
MICROBEAST PLUS is the successor of MICROBEAST. It features latest sensor technology and the weight has been reduced in comparance to MICROBEAST.
MICROBEAST PLUS HD is the "heavy duty" variant of MICROBEAST PLUS. It additionally has a high power input to satisfy the demands of today's high power servos and to ensure a stable power supply especially in RC helicopters from 600 size and larger.
The MICROBEAST PLUS devices are offered with different software that may include optional feature sets. At the moment there are offered three versions: the basic version, one with RPM Governor and the full featured Pro-Edition with RPM-Governor and AttitudeControl. You can upgrade units with lower feature levels at any time. As higher feature levels enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the additional features there is no functional difference to the basic firmware. So if you don't need the additional features there is no must to buy them. Also you can upgrade step-wise, i.e. if you have already bought the Governor Edition you can upgrade to Pro-Edition at reduced price.
Firmware sets
|
Basic | Governor | ProEdition |
---|---|---|---|
Software version | V3 | V4 | V4 |
RPM Governor (Electro & Nitro) | |||
AttitudeControl | |||
Upgrade Price | - | 19,- € | 99,- € |
You can buy upgrades and request updates for your MICROBEAST PLUS by using the update functionality of StudioX. For more information have a look here. Current firmware versions available:
4.0.0
- The RPM Governor can be used for electric and glow helicopters. It has built in soft start and autorotation bail out function. The control it quite similar to electric speed controllers with governor function, so you simply set your throttle curves as switches for "motor off", "headspeed 1", "headspeed 2" and "autorotation bailout". Adjusting complex throttle curves is not necessary anymore and the helicopter will maintain the specified rotor head speed over the whole flight. Optional the nitro governor can be also used in classic style with throttle curves and a separate switch for governor/rpm control.
- AttitudeControl overs different modes of self leveling. These are "Bailout rescue mode", "3D-Mode" and "Flight trainer mode" with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to level position when you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight regardless of how the pilot moves the stick.
3.2.0
- supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
- added rudder servo sub trim feature
- changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
- safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go through the complete menu otherwise nothing will change
3.1.3
- Bugfix: receiver channel initialisation could cause unit to start without stick control
AR7200BX and AR7300BX
AR7200BX is a DSMX receiver from Spektrum RC that has a built in MICROBEAST unit and which was designed in cooperation with BEASTX.
AR7300BX is the "heavy duty" variant of AR7200BX. It additionally has a high power input to satisfy the demands of today's high power servos and to ensure a stable power supply especially in RC helicopters from 600 size and larger.
Updates for your AR7200BX/AR7300BX can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see here). Current firmware versions available:
4.0.14
- RPM Governor feature for nitro and gas engines
3.1.0
- Similar to MICROBEAST firmware 3.0.12.
Microbeast
MICROBEAST was the first product of BEASTX company. It is a flybarless unit that can be programmed without the need for a computer or external programming device. Its unique EasySetup makes it possible to program the system within a few minutes just by using the button on the unit and your transmitter. There are not many parameters to adjust as MICROBEAST can be used with nearly any RC helicopter model "out of the box".
Updates for your MICROBEAST can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see here). Current firmware versions available:
3.0.12
- Supports Graupner HOTT SUMD serial line signal
- Improved receiver channel initialization
- Improved tail gyro algorithm for Normal-Rate mode
Trajectory
The TSA Trajectory is an OEM version of MICROBEAST, specially made for TSA Model. The functionality is equal to MICROBEAST.
Updates for your Trajectory can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see here). Current firmware versions available:
3.0.12
- Similar to MICROBEAST, see above.
USB2SYS-Interface
The USB2SYS is an adapter which allows connection of MICROBEAST/MICROBEAST PLUS with your computer's USB port. This can be used for firmware updates of the unit or to make adjustments directly with the computer by using one of the BEASTX software solutions (BEASTX Updater, MicroSettings, StudioX). You can also use this interface in combination with the AR7200BX/AR7300BX receiver.
SPMA3030-Interface
The SPMA3030 is an adapter which allows connection of AR7200BX/AR7300BX receiver with your computer's USB port. This can be used for firmware Updates of the unit or to make adjustments directly with the computer by using one of the BEASTX software solutions (BEASTX Updater, MicroSettings, StudioX). You can also use this interface in combination with MICROBEAST/MICROBEAST PLUS.