Translations:Help:FAQ:General/9/en

MICROBEAST PLUS

5.8.3

Telemetry/PROEDITION

• bugfix for Kontronik JIVE LV/HV and YGE Texy telemetry
  

5.8.1

Telemetry/PROEDITION

• added telemetry data processing for OMP 65A ESC (OMP M4 heli)
  

5.7.0

Telemetry (optional/PROEDITION)

• added telemetry data processing for YGE ESC(YGE TEXY protocol)
• added telemetry data processing for Spektrum AVIAN Smart ESC (must be connected at SYS port)
• added telemetry data input for Graupner HOTT receivers (telemetry line must be connected at SYS port)
• capacity correction value now can be used in combination with any telemetry ESC if needed
  

5.5.2

Telemetry (optional/PROEDITION)

• added telemetry data processing for Scorpion Tribunus II 14-200 ESC
  

5.5.1

Telemetry (optional/PROEDITION)

• added telemetry data processing for Hobbywing Platinum V5 ESC
  

5.4.0

Telemetry (optional/PROEDITION)

• added SRXL2 and EXBUS telemetry output
• added telemetry data processing for Hobbywing Platinum V4, Kontronik Jive/Kosmik and Scorpion Tribunus ESCs
  

5.2.4

AttitudeControl rescue (optional/PROEDITION)

• added option for automatic rescue deactivation when helicopter reaches level position

Setup

• menu point ordering has changed in SETUP MENU (H = servo reverse, I = stick directions, J = servo trim, K = cyclic throw, L = collective, M = swash limit)!
• added swashplate trim option to the trim menu at SETUP MENU Point J

Receivers

• added SRXL2 receiver protocol, can be connected at white pin board on the side
• added option to connect iBus remote receiver (comes with ALIGN T-Rex 300X)
• made ready for telemtry support (coming soon..)

StudioX

• added help buttons to display help text only when needed
• added screen stacks for adjustment buttons for clearer display layout on smartphones