Translations:Help:FAQ:Inflight/13/en

From BEASTX Wiki
Revision as of 11:03, 27 February 2018 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Servos react somehow "notchy" at high frame rate. Is AR7200BX/AR7210BX/AR7300BX damaging my servos?

If the servos are approved by the manufacturer for the chosen update frequency, this is a normal effect. The servos get new positioning signals four times faster than if they are connected to a conventional remote control receiver. Especially servos with brushless motors run very hard and direct which causes slightly jerky movements in modes with high servo frame rate. This is totally harmless to the servos and you will not notice in flight operation.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Inflight/13/en&oldid=15081"