Translations:Manuals:MBPlusFblV52:TailMotor/9/en

Final steps

Finally, use your radio to set the tail gyro. For the Logo 200/OMP M4 start with 60% of tail gain. Note that unlike the "big" helicopter with conventional tail rotor system, the gain value can be used for all flight modes. Since the tail motor turns independent from the main motor, it can always have the same setting. If tail has not enough stopping power and breaks when you fly around and move collective, it is necessary to increase the gain. The higher the gain, the tighter the tail is held. When the tail only breaks out during pitch pump, check RevoMix setting in StudioX. When gain is too high, the tail will start to overshoot and oscilate. Lower gain immediately in this case. We have also installed a RevoBoost parameter, which additionally accelerates the main motor when you want to steer to the left in order to give the tail an extra push. Left direction is difficult because you can only turn off the motor, but not actively force the tail to the left! Please note the RevoBoost is only active when using the Governor function of MICROBEAST.