Translations:StudioXm:Connection/14/en

From BEASTX Wiki
Revision as of 14:47, 10 June 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Since BEASTX firmware version 5.9.x, it is possible to connect a telemetry receiver to the [SYS] port to transfer telemetry data and menu settings to and from the BEASTX device. In order to connect the interface for the StudioX app, you can temporarily remove the receiver and connect the SYS interface to the [SYS] port. However, in this case, it may not be possible to control the system from the radio in the StudioX menus. Therefore, as an alternative, you can connect the USB2SYS/BLE2SYS interface to the side of your MICROBEAST PLUS/MICROBEAST ULTRA instead of using the [SYS] port. This will require an adapter from the standard servo connector to the JST 6-pin format.




Retrieved from "https://wiki.beastx.com/index.php?title=Translations:StudioXm:Connection/14/en&oldid=24112"