Translations:Manuals:BXFbl:Setupmenu E TM/18/en

2. Now raise the throttle of the main motor above 10%. The tail motor will start to turn with raised throttle as well. This is the throttle for takeoff and hovering. It should be apprx. 50% of maximum throttle. You can increase/decrease the throttle by tapping the rudder stick left/right or by adjusting the corresponding value in the StudioX app. Adjust this value later if needed. This can be necessery when the helicopter will tends to turn into one or another direction during takeoff or when hovering. Explicitly this effect is more severe when using low tail gyro gain or when not using the heading lock mode of the tail gyro.