Translations:Manuals:BXFbl:TelemetryInfo/2/en

The Telemetry Hub feature turns your BEASTX System into a hub for processing incoming and outgoing telemetry data, so it can pass ESC and sensor data through to your radio's telemetry display. To use telemetry you need to set up your radio system accordingly. Here we describe the basic steps for enabling the telemetry display on different radio systems. For further information on setting up alarms and other options, please refer to the instruction manual of your radio system.

Telemetry hub is only available for MICROBEAST PLUS and MICROBEAST ULTRA. With Nanobeast there is no option to connect a telemetry sensor.

Anyhow, you can connect a receiver with telemetry back link to your Nanobeast (i.e. JETI EXBUS, ELRS receiver or SPEKTRUM SRXL2 receiver). This allows to use the telemetry for setting up your device remotely from the radio by using the JETIBOX emulation, BEASTX Lua script on OpenTX radios or Spektrum SMART Telemetry screen on your Spektrum radio. For further information please have a look at the specific radio setup procedure in the RX section.