Translations:Manuals:BXFbl:ControlStyle/5/en

Setup with StudioX Flow

Once StudioX Flow has connected to your BEASTX System, click the Parameter button on the device overview main screen. Then, in the parameter settings, click the "Next" button (->) to switch to the Bank 1 - Control style page. Here you can select a preset. In the advanced view (click the gear symbol below) you will see the currently used maximum rotation rates and expo values for each control function - aileron, elevator and rudder. The rate is measured in degrees per second; a value of 360, for example, means your helicopter will make one full turn/rotation in one second when you move the stick to full deflection. The expo value is specified in percent. 0% expo means the stick input influences the output linearly. Usually this makes the control feel very sensitive and over-reactive. By adding some expo you can soften the input around the stick center position.

When using the Bank Switching feature, you can set different control styles for each bank. Click "Next" until you reach Bank 2 - Control style or Bank 3 - Control style and adjust as necessary, or set the values the same as Bank 1 if you don't want different styles on each bank.

Please note that your custom values for Bank 1 will be changed/overwritten when you select a preset control style in the PARAMETER MENU on the device (see above)!