Translations:Manuals:BXFbl:TelemetryInfo/4/en

From BEASTX Wiki
Jump to navigation Jump to search

SPEKTRUM SRXL2

Make sure your receiver is bound as a telemetry receiver. This usually happens automatically when binding the receiver - the message shown on the radio during the bind procedure is "DSMX 11ms - Telemetry".

To enable the telemetry display on your SPEKTRUM radio, open the "Function List" and choose the telemetry options screen. Here enable the "Volts", "ESC", "RPM" and "Flight pack" displays. You don't have to enable all screens, but these are basically the ones used by your BEASTX System. If you enter one of the screens, you can enable specific alarms for each metric, e.g. a low voltage alarm from the "Volts" setting, or a maximum allowed capacity draw from the "Flight pack" screen. Please refer to the manual of your SPEKTRUM radio for more information.



From the main screen you can then scroll through the different telemetry screens:



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:TelemetryInfo/4/en&oldid=26728"