Translations:Manuals:MBUltraFblV5:Gains/8/en

Cyclic adjustment

Dial 1: Cyclic gain
The swash gyro gain (cyclic gain) can be set by dial 1 from 50% up to 150%. The factory setting is horizontal which corresponds to 100% swashplate gain. Turn dial 1 clockwise to increase the gain and counter clockwise to decrease. For your first flights we suggest not changing this setting. However, when using very small helicopters (such as 250 or 450 size), reduce the cyclic gain by 3 marks (=75% gain) as with such small helicopters the control loop tends to overcompensate more easily.

Dial 2: Cyclic feed forward
Factory setting of dial 2 is horizontal which provides a good setup in most cases. Turn dial 2 clockwise to increase the cyclic feed forward. This will cause more cyclic stick input going directly to aileron and elevator on the swashplate. Decreasing the direct stick feed forward will do the opposite.