Translations:Manuals:MBUltraFblV5:Radio System/19/en
Jump to navigation
Jump to search
Single wire with telemetry
When using a telemetry receiver and an ESC with telemetry data connector, the ESC is connected to the [IO1] output. The telemetry data signal of the ESC is connected to [IO2] input.
Spektrum® AVIAN ESC do not have a separate line for telemetry data. Here motor control and telemetry data is sent bidirectional on the main connection wire. For this we must connect the AVIAN ESC to the [SYS] port of MICROBEAST ULTRA, as the other connectors [IO1] and [IO2] can only work in one direction.
You will get further information about connecting and setting up the speed controller in a later section!