Translations:Manuals:MB Plus:Governormenu F/3/en
Jump to navigation
Jump to search
Menu point G Status-LED |
YZ | Menu point H Status-LED |
---|---|---|
off | .00 | off |
off | .05 | purple flashing |
off | .10 | purple |
off | .15 | red flashing |
purple flashing | .20 | off |
purple flashing | .25 | purple flashing |
purple flashing | .30 | purple |
purple flashing | .35 | red flashing |
purple | .40 | off |
purple | .45 | purple flashing |
purple | .50 | purple |
purple | .55 | red flashing |
red flashing | .60 | off |
red flashing | .65 | purple flashing |
red flashing | .70 | purple |
red flashing | .75 | red flashing |
red | .80 | off |
red | .85 | purple flashing |
red | .90 | purple |
red | .95 | red flashing |
Setting the option „user defined“ at menu point F you can choose a custom gear ratio that can be edited by using the StudioX software and the optional USB2SYS interface. This allows to choose ratios smaller than 8.00:1 or greater than 14.95:1 or a ratio that is not a multiplier of 0.05.
In this case the menu points G and H will be skipped when the button is briefly pressed at menu point F.