Translations:Manuals:MB Plus:Parametermenu A/2/en

Swashplate servos

Contrary to centering every single servo at Setup menu point G, here you are able to directly adjust aileron and elevator without taking care about the single servos. Similar to the digital trim function of most transmitters here at Parameter menu point A you can adjust the swashplate “one click“ by shortly moving the aileron or elevator stick in the desired direction. If you want to trim the swashplate any further repeat tapping the stick several times or simply hold the control stick pushed for a longer time to automatically perform several trim steps. The color of the Status-LED gives you an approximate indication of how much you did trim.

Please note that this function, as opposed to the digital trim of the transmitter, is not a separate trim function. Here you directly adjust the servo centers as well as you would set servo centers at Setup menu point G. Technically there is no difference between Parameter menu point A and Setup menu point G.