Translations:Help:FAQ:Inflight/4/en

How to increase rotation rate for aileron, elevator and rudder?

The rotation speed of the helicopter is only determined by the length of the stick output signal. The gyros measure the actual rotation rate and the system will move the helicopter as fast as it is determined by the stick position. So simply increasing/decreasing the stick throw (mostly done by increasing/decreasing servo throw or using DualRate in the TX for the specified function) will increase/decrease rotation rate. Or you also can change the rate by choosing a different Control style (PARAMETER MENU point B) or directly editing the rate by software with StudioX or the StudioXm App.

Please note: The rotation rate in first line has nothing to do with your cyclic pitch adjustments (SETUP MENU points J and L) and also has nothing to do with the cyclic pitch you see when steering cyclics on the ground! In flight the system will automatically control the pitch as it is necessary to maintain the given rate. So always setup the cyclic pitch as mentioned in the manual (set the throw to exact 6.0 degrees at menu point J and limit as less as possible at point L so the system has enough range of motion) and do not rely on what you see when moving the sticks on the ground.