SETUPMENÜ A - Einbaulage

Der AR7210BX Empfänger kann in nahezu jeder Einbaulage am Heli montiert werden. Zu beachten ist nur, dass die Steckerleiste für die Servoanschlüsse immer in oder gegen die Flugrichtung des Helikopters zeigen müssen und dass die Gehäusekanten des Geräts perfekt parallel zu den Drehachsen des Helis ausgerichtet sind.

Status LED off	Status LED blinkt violett	Status LED violett	Status LED blinkt rot
Status LED rot	Status LED blinkt blau	Status LED blau	Status LED rot/blau

Dear customer, please note that this manual is still under construction! The pictures above show the MICROBEAST PLUS but the device orientation and layout of AR7210BX is similar!

Adjustment at the device

Select the orientation that the device is actually mounted on your heli by choosing the suitable Status LED color shown at SETUP MENU point A. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.

Status-LED	Device orientation
off	flat, sticker on top side, socket points in flight direction
purple flashing	vertical, button is on the top, socket points in flight direction
purple	flat inverted, sticker on bottom side, socket points in flight direction
red flashing	vertical inverted, button is on the bottom, socket points in flight direction
red	flat, sticker on top side, socket points to the tail boom
blue flashing	vertical, button is on the top, socket points to the tail boom
blue	flat inverted, sticker on bottom side, socket points to the tail boom
red/blue	vertical inverted, button is on the bottom, socket points to the tail boom

Setup with StudioXm

Choose the orientation that the device is actually mounted on your heli by choosing the matching type in the app.

File:SetupA mobile.png