Translations:Manuals:MBUltraFblV5:Radio System/13/en
Remote receivers (Spektrum® DSMX/DSM2, JR® DMSS, ALIGN® iBus) can be directly connected to the white pin board at the side of MICROBEAST ULTRA. Here the receiver will be powered with a stabilized voltage of 3.3 Volts! Voltage is the first pin from the front/right, minus is the second pin from the right, signal is connected at the third pin from the right.
Please note: MICROBEAST ULTRA does not support connecting more than one remote satellite at a time!
JR®/Spektrum® remote satellite connected at side pin board |
Using a remote satellite is only recommended for small rc models (helicopters of 450 size or smaller). Due to the design, one single receiving unit is more prone to radio interference and can result in reduced transmission range!