Translations:Manuals:MBUltraFblV5:TelemetryInfo/4/en

From BEASTX Wiki
Revision as of 09:34, 19 December 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

SPEKTRUM SRXL2

Make sure you receiver is bound as telemetry receiver. Usually this happens automatically when binding the receiver. Message on the radio during bind procedure: "DMSX 11ms - Telemetry".

To enable telemetry display on your SPEKTRUM radio, open the "Function List" and choose telemetry options screen. Here enable "Volts", "ESC", "RPM" and "Flight pack" displays. You don't have to enable all screens, but basically this is what is used by MICROBEAST. If you enter one of the screens, you can enable the specific alarms for each metric, i. e. enable a low voltage alarm from the "Volts" setting, or add maximum allowed capacity draw from the "Flight pack" screen. Please refer to the manual of you SPEKTRUM radio for more information.

     



From the main screen you can then scroll through the different telemetry screens:

     



Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:TelemetryInfo/4/en&oldid=22373"