Translations:Manuals:BXFbl:Receiver M/21/en

Notes for NANOBEAST

NANOBEAST doesn't support telemetry sensors at this moment. Since firmware v5.10.x yon can only use the telemetry backlink at SYS port in combination with ELRS/CRSF, JETI EXBus or Spektrum SRXL2 receivers in order to remotely setup your NANOBEAST directly from the radio. See EDGETX Lua Script section for further information.

The parameters shown below won't be accessible on NANOBEAST. The SYS port will automatically be set to bi-directional telemetry communication during receiver type scan! If no RC signal arrives within 5 seconds of power-up (e.g. because the transmitter is switched off), the SYS port automatically falls back to normal operation.