Translations:BEASTX Devices/1/en

From BEASTX Wiki
Revision as of 14:09, 8 June 2015 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Jump to navigation Jump to search

Microbeast

MICROBEAST was the first product of BEASTX company. It is a flybarless unit that can be programmed without the need for a computer or external programming device. Its unique EasySetup makes it possible to program the system within a few minutes just by using the button on the unit and your transmitter. There are not many parameters to adjust as MICROBEAST can be used with nearly any RC helicopter model "out of the box".

 
noframe

Updates for your MICROBEAST can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see here). Current firmware versions available:

3.0.12

  • Supports Graupner HOTT SUMD serial line signal
  • Improved receiver channel initialization
  • Improved tail gyro algorithm for Normal-Rate mode


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:BEASTX_Devices/1/en&oldid=6934"