Translations:Manuals:BXFbl:Radio Setup:SRXL2/7/en
Jump to navigation
Jump to search
Connecting to DI2 port
To connect a receiver with standard servo connectors, i.e. the AR6610T or AR8020T you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - order nr. BXA76403. Voltage is the first pin from the left, signal is connected at the third pin from the left. Minus is the second pin from the front/right.
|
| SRXL2 receiver with standard servo connector and adapter |