Translations:Manuals:BXFbl:Radio Setup:SRXL2/9/en

From BEASTX Wiki
Jump to navigation Jump to search

Throttle servo / ESC

MICROBEAST PLUS
The ESC or throttle servo usually is connected at DI1 port. If needed the telemetry data line from the ESC is connected to the CH5 port.

When using a SPEKTRUM® Avian ESC with SRXL2 telemetry this must be connected at SYS port. In consequence it is mandatory to connect the receiver at the DI2 port as shown above!

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Radio_Setup:SRXL2/9/en&oldid=22676"