Translations:Manuals:BXFbl:Setupmenu G/11/en
Jump to navigation
Jump to search
Additional swashplate servo for scale helicopters
When using a scale helicopter with 90 degrees eCCPM, you can connect a second elevator servo to [CH7] output on the MICROBEAST PLUS. On MICROBEAST ULTRA the second elevator servo connects to [CH6]. Please note that the second elevator servo port will require a power cycle to enable after you've set up 90 degrees eCCPM mode. You can also change the ratio for the servo at [CH6] / [CH7] in StudioX to activate the additional servo output. When the ratio for [CH6] / [CH7] is 0 on the other hand, the servo outputs will be controlled from the AUX channel that can be set in RECEIVER MENU.